PRODUCTS

 Foundation3D                  

  Mat3D  

 Shaft3D                

• Are you faced with designing a spread or combined footing with multiple load cases?
• Are the pier(s) of your spread or combined footing located asymmetrically in both directions?
• Would you like to compare the results of a soil and a pile supported foundation for the same problem?

Combined3D is a general spread and combined footing analysis/design tool that completes soil or pile supported foundation with minimal input. It is equipped with the following features:

• Allows multiple system of units for input and output - English, Metric and SI
• Supports ACI 318, BSI 8110, CSA A23.3 and IBC  building codes
• Considers buoyancy effects in the calculation of bearing pressures, stability ratios and pile capacities for footing/pile cap design
• Accepts unlimited type and number of load cases
• Accepts unlimited type and number of factored and unfactored load combinations
• Analyzes/Designs pile cap on square, rectangular and circular regular and irregular pile patterns
• Designs square, rectangular, octagonal and circular piers
• Provides multiple choices of longitudinal rebar arrangement in  piers
• Analyzes/Designs square, rectangular and octagonal footings/pile caps
• Considers wide beam shear and punching shear in footing/pile cap design
• Provides positive and negative moment reinforcement in the footings/pile caps
• Provides multiple choices of footing rebar arrangement
• Allows the user to change the footing rebar size and spacing
• Accepts anchor bolt arrangement on piers for display on sketches and construction drawing
• Generates material quantities
• Generates detailed design sketches of foundation plan, elevation and a section through the pier showing reinforcement
• Interfaces with Autocad, Microstation and SmartSketch to produce detailed construction drawings
• Generates a summarized and a detailed input and output report

 Design Sketch of Foundation Plan, Elevation and a Section through the Pier

(Click on the picture to view a larger image)

Try our 30 day evaluation version and see for yourself the significant time savings you will achieve through our integrated, single program solution.